END OF THIS ARTICLE IS A STEP BY STEP VIDEO I MADE TO GUIDE YOU
-Safety First: Before starting, ensure the scooter is turned off, and wear safety gear like gloves and goggles.
-Tools Needed: Gather the necessary tools, including tire levers, a wrench, and a new tube and tire.
-Locate the Flat Tire: Identify the flat or damaged tire. It may be the front or rear.
-Remove the Wheel: Unscrew the axle nuts to detach the wheel from the scooter frame.
-Deflate the Tire: Release any remaining air from the flat tire.
-Use Tire Levers: Insert tire levers between the tire and the rim to pry the tire off the rim gradually.
-Remove the Old Tube: Take out the old tube from inside the tire.
-Check for Obstructions: Inspect the inside of the tire and the rim for any foreign objects or damage that may have caused the flat.
-Install the New Tube: Place the new tube inside the tire, making sure it’s not twisted.
-Mount the Tire: Carefully reseat the tire onto the rim, starting at the valve stem.
TIP: Use silicone spray to act as a lubricant if needed
-Inflate the Tube: Use a pump to inflate the new tube. Ensure it’s not overinflated or underinflated, following the manufacturer’s recommendations.
-Check for Proper Seating: Confirm that the tire is properly seated on the rim, and the tube is not pinched.
-Reattach the Wheel: Slide the wheel back onto the scooter’s frame and secure it with the axle nuts.
-Tighten Axle Nuts: Use a wrench to tighten the axle nuts securely.
-Check for Smooth Rotation: Spin the wheel to ensure it rotates smoothly without any wobbles.
-Test the Scooter: Turn the scooter on and take it for a short test ride to ensure everything is functioning correctly.
-Dispose of Old Tube Properly: Recycle or dispose of the old tube following local regulations.
Remember that if you’re unsure about changing your electric scooter’s tube and tire, it’s best to consult the scooter’s user manual or seek professional assistance.
